Diffusers documentation

Stable diffusion XL

Diffusers

Join the Hugging Face community

and get access to the augmented documentation experience

Collaborate on models, datasets and Spaces

Faster examples with accelerated inference

Switch between documentation themes

to get started

Stable diffusion XL

Stable Diffusion XL은 Dustin Podell, Zion English, Kyle Lacey, Andreas Blattmann, Tim Dockhorn, Jonas Müller, Joe Penna, Robin Rombach에 의해 SDXL: Improving Latent Diffusion Models for High-Resolution Image Synthesis에서 제안되었습니다.

논문 초록은 다음을 따릅니다:

text-to-image의 latent diffusion 모델인 SDXL을 소개합니다. 이전 버전의 Stable Diffusion과 비교하면, SDXL은 세 배 더큰 규모의 UNet 백본을 포함합니다: 모델 파라미터의 증가는 많은 attention 블럭을 사용하고 더 큰 cross-attention context를 SDXL의 두 번째 텍스트 인코더에 사용하기 때문입니다. 다중 종횡비에 다수의 새로운 conditioning 방법을 구성했습니다. 또한 후에 수정하는 image-to-image 기술을 사용함으로써 SDXL에 의해 생성된 시각적 품질을 향상하기 위해 정제된 모델을 소개합니다. SDXL은 이전 버전의 Stable Diffusion보다 성능이 향상되었고, 이러한 black-box 최신 이미지 생성자와 경쟁력있는 결과를 달성했습니다.

팁

Stable Diffusion XL은 특히 786과 1024사이의 이미지에 잘 작동합니다.
Stable Diffusion XL은 아래와 같이 학습된 각 텍스트 인코더에 대해 서로 다른 프롬프트를 전달할 수 있습니다. 동일한 프롬프트의 다른 부분을 텍스트 인코더에 전달할 수도 있습니다.
Stable Diffusion XL 결과 이미지는 아래에 보여지듯이 정제기(refiner)를 사용함으로써 향상될 수 있습니다.

이용가능한 체크포인트:

Text-to-Image (1024x1024 해상도): StableDiffusionXLPipeline을 사용한 stabilityai/stable-diffusion-xl-base-1.0
Image-to-Image / 정제기(refiner) (1024x1024 해상도): StableDiffusionXLImg2ImgPipeline를 사용한 stabilityai/stable-diffusion-xl-refiner-1.0

사용 예시

SDXL을 사용하기 전에 transformers, accelerate, safetensors 와 invisible_watermark를 설치하세요. 다음과 같이 라이브러리를 설치할 수 있습니다:

pip install transformers
pip install accelerate
pip install safetensors
pip install invisible-watermark>=0.2.0

워터마커

Stable Diffusion XL로 이미지를 생성할 때 워터마크가 보이지 않도록 추가하는 것을 권장하는데, 이는 다운스트림(downstream) 어플리케이션에서 기계에 합성되었는지를 식별하는데 도움을 줄 수 있습니다. 그렇게 하려면 invisible_watermark 라이브러리를 통해 설치해주세요:

pip install invisible-watermark>=0.2.0

invisible-watermark 라이브러리가 설치되면 워터마커가 기본적으로 사용될 것입니다.

생성 또는 안전하게 이미지를 배포하기 위해 다른 규정이 있다면, 다음과 같이 워터마커를 비활성화할 수 있습니다:

pipe = StableDiffusionXLPipeline.from_pretrained(..., add_watermarker=False)

Text-to-Image

text-to-image를 위해 다음과 같이 SDXL을 사용할 수 있습니다:

from diffusers import StableDiffusionXLPipeline
import torch

pipe = StableDiffusionXLPipeline.from_pretrained(
    "stabilityai/stable-diffusion-xl-base-1.0", torch_dtype=torch.float16, variant="fp16", use_safetensors=True
)
pipe.to("cuda")

prompt = "Astronaut in a jungle, cold color palette, muted colors, detailed, 8k"
image = pipe(prompt=prompt).images[0]

Image-to-image

image-to-image를 위해 다음과 같이 SDXL을 사용할 수 있습니다:

import torch
from diffusers import StableDiffusionXLImg2ImgPipeline
from diffusers.utils import load_image

pipe = StableDiffusionXLImg2ImgPipeline.from_pretrained(
    "stabilityai/stable-diffusion-xl-refiner-1.0", torch_dtype=torch.float16, variant="fp16", use_safetensors=True
)
pipe = pipe.to("cuda")
url = "https://huggingface.co/datasets/patrickvonplaten/images/resolve/main/aa_xl/000000009.png"

init_image = load_image(url).convert("RGB")
prompt = "a photo of an astronaut riding a horse on mars"
image = pipe(prompt, image=init_image).images[0]

인페인팅

inpainting를 위해 다음과 같이 SDXL을 사용할 수 있습니다:

import torch
from diffusers import StableDiffusionXLInpaintPipeline
from diffusers.utils import load_image

pipe = StableDiffusionXLInpaintPipeline.from_pretrained(
    "stabilityai/stable-diffusion-xl-base-1.0", torch_dtype=torch.float16, variant="fp16", use_safetensors=True
)
pipe.to("cuda")

img_url = "https://raw.githubusercontent.com/CompVis/latent-diffusion/main/data/inpainting_examples/overture-creations-5sI6fQgYIuo.png"
mask_url = "https://raw.githubusercontent.com/CompVis/latent-diffusion/main/data/inpainting_examples/overture-creations-5sI6fQgYIuo_mask.png"

init_image = load_image(img_url).convert("RGB")
mask_image = load_image(mask_url).convert("RGB")

prompt = "A majestic tiger sitting on a bench"
image = pipe(prompt=prompt, image=init_image, mask_image=mask_image, num_inference_steps=50, strength=0.80).images[0]

이미지 결과물을 정제하기

base 모델 체크포인트에서, StableDiffusion-XL 또한 고주파 품질을 향상시키는 이미지를 생성하기 위해 낮은 노이즈 단계 이미지를 제거하는데 특화된 refiner 체크포인트를 포함하고 있습니다. 이 refiner 체크포인트는 이미지 품질을 향상시키기 위해 base 체크포인트를 실행한 후 “두 번째 단계” 파이프라인에 사용될 수 있습니다.

refiner를 사용할 때, 쉽게 사용할 수 있습니다

1.) base 모델과 refiner을 사용하는데, 이는 Denoisers의 앙상블을 위한 첫 번째 제안된 eDiff-I를 사용하거나
2.) base 모델을 거친 후 SDEdit 방법으로 단순하게 refiner를 실행시킬 수 있습니다.

참고: SD-XL base와 refiner를 앙상블로 사용하는 아이디어는 커뮤니티 기여자들이 처음으로 제안했으며, 이는 다음과 같은 diffusers를 구현하는 데도 도움을 주셨습니다.

1.) Denoisers의 앙상블

base와 refiner 모델을 denoiser의 앙상블로 사용할 때, base 모델은 고주파 diffusion 단계를 위한 전문가의 역할을 해야하고, refiner는 낮은 노이즈 diffusion 단계를 위한 전문가의 역할을 해야 합니다.

2.)에 비해 1.)의 장점은 전체적으로 denoising 단계가 덜 필요하므로 속도가 훨씬 더 빨라집니다. 단점은 base 모델의 결과를 검사할 수 없다는 것입니다. 즉, 여전히 노이즈가 심하게 제거됩니다.

base 모델과 refiner를 denoiser의 앙상블로 사용하기 위해 각각 고노이즈(high-nosise) (즉 base 모델)와 저노이즈 (즉 refiner 모델)의 노이즈를 제거하는 단계를 거쳐야하는 타임스텝의 기간을 정의해야 합니다. base 모델의 denoising_end와 refiner 모델의 denoising_start를 사용해 간격을 정합니다.

denoising_end와 denoising_start 모두 0과 1사이의 실수 값으로 전달되어야 합니다. 전달되면 노이즈 제거의 끝과 시작은 모델 스케줄에 의해 정의된 이산적(discrete) 시간 간격의 비율로 정의됩니다. 노이즈 제거 단계의 수는 모델이 학습된 불연속적인 시간 간격과 선언된 fractional cutoff에 의해 결정되므로 ‘강도’ 또한 선언된 경우 이 값이 ‘강도’를 재정의합니다.

예시를 들어보겠습니다. 우선, 두 개의 파이프라인을 가져옵니다. 텍스트 인코더와 variational autoencoder는 동일하므로 refiner를 위해 다시 불러오지 않아도 됩니다.

from diffusers import DiffusionPipeline
import torch

base = DiffusionPipeline.from_pretrained(
    "stabilityai/stable-diffusion-xl-base-1.0", torch_dtype=torch.float16, variant="fp16", use_safetensors=True
)
pipe.to("cuda")

refiner = DiffusionPipeline.from_pretrained(
    "stabilityai/stable-diffusion-xl-refiner-1.0",
    text_encoder_2=base.text_encoder_2,
    vae=base.vae,
    torch_dtype=torch.float16,
    use_safetensors=True,
    variant="fp16",
)
refiner.to("cuda")

이제 추론 단계의 수와 고노이즈에서 노이즈를 제거하는 단계(즉 base 모델)를 거쳐 실행되는 지점을 정의합니다.

n_steps = 40
high_noise_frac = 0.8

Stable Diffusion XL base 모델은 타임스텝 0-999에 학습되며 Stable Diffusion XL refiner는 포괄적인 낮은 노이즈 타임스텝인 0-199에 base 모델로 부터 파인튜닝되어, 첫 800 타임스텝 (높은 노이즈)에 base 모델을 사용하고 마지막 200 타입스텝 (낮은 노이즈)에서 refiner가 사용됩니다. 따라서, high_noise_frac는 0.8로 설정하고, 모든 200-999 스텝(노이즈 제거 타임스텝의 첫 80%)은 base 모델에 의해 수행되며 0-199 스텝(노이즈 제거 타임스텝의 마지막 20%)은 refiner 모델에 의해 수행됩니다.

기억하세요, 노이즈 제거 절차는 높은 값(높은 노이즈) 타임스텝에서 시작되고, 낮은 값 (낮은 노이즈) 타임스텝에서 끝납니다.

이제 두 파이프라인을 실행해봅시다. denoising_end과 denoising_start를 같은 값으로 설정하고 num_inference_steps는 상수로 유지합니다. 또한 base 모델의 출력은 잠재 공간에 있어야 한다는 점을 기억하세요:

prompt = "A majestic lion jumping from a big stone at night"

image = base(
    prompt=prompt,
    num_inference_steps=n_steps,
    denoising_end=high_noise_frac,
    output_type="latent",
).images
image = refiner(
    prompt=prompt,
    num_inference_steps=n_steps,
    denoising_start=high_noise_frac,
    image=image,
).images[0]

이미지를 살펴보겠습니다.

원래의 이미지	Denoiser들의 앙상블

동일한 40 단계에서 base 모델을 실행한다면, 이미지의 디테일(예: 사자의 눈과 코)이 떨어졌을 것입니다:

앙상블 방식은 사용 가능한 모든 스케줄러에서 잘 작동합니다!

2.) 노이즈가 완전히 제거된 기본 이미지에서 이미지 출력을 정제하기

일반적인 StableDiffusionImg2ImgPipeline 방식에서, 기본 모델에서 생성된 완전히 노이즈가 제거된 이미지는 refiner checkpoint를 사용해 더 향상시킬 수 있습니다.

이를 위해, 보통의 “base” text-to-image 파이프라인을 수행 후에 image-to-image 파이프라인으로써 refiner를 실행시킬 수 있습니다. base 모델의 출력을 잠재 공간에 남겨둘 수 있습니다.

from diffusers import DiffusionPipeline
import torch

pipe = DiffusionPipeline.from_pretrained(
    "stabilityai/stable-diffusion-xl-base-1.0", torch_dtype=torch.float16, variant="fp16", use_safetensors=True
)
pipe.to("cuda")

refiner = DiffusionPipeline.from_pretrained(
    "stabilityai/stable-diffusion-xl-refiner-1.0",
    text_encoder_2=pipe.text_encoder_2,
    vae=pipe.vae,
    torch_dtype=torch.float16,
    use_safetensors=True,
    variant="fp16",
)
refiner.to("cuda")

prompt = "Astronaut in a jungle, cold color palette, muted colors, detailed, 8k"

image = pipe(prompt=prompt, output_type="latent" if use_refiner else "pil").images[0]
image = refiner(prompt=prompt, image=image[None, :]).images[0]

원래의 이미지	정제된 이미지

refiner는 또한 인페인팅 설정에 잘 사용될 수 있습니다. 아래에 보여지듯이 StableDiffusionXLInpaintPipeline 클래스를 사용해서 만들어보세요.

Denoiser 앙상블 설정에서 인페인팅에 refiner를 사용하려면 다음을 수행하면 됩니다:

from diffusers import StableDiffusionXLInpaintPipeline
from diffusers.utils import load_image

pipe = StableDiffusionXLInpaintPipeline.from_pretrained(
    "stabilityai/stable-diffusion-xl-base-1.0", torch_dtype=torch.float16, variant="fp16", use_safetensors=True
)
pipe.to("cuda")

refiner = StableDiffusionXLInpaintPipeline.from_pretrained(
    "stabilityai/stable-diffusion-xl-refiner-1.0",
    text_encoder_2=pipe.text_encoder_2,
    vae=pipe.vae,
    torch_dtype=torch.float16,
    use_safetensors=True,
    variant="fp16",
)
refiner.to("cuda")

img_url = "https://raw.githubusercontent.com/CompVis/latent-diffusion/main/data/inpainting_examples/overture-creations-5sI6fQgYIuo.png"
mask_url = "https://raw.githubusercontent.com/CompVis/latent-diffusion/main/data/inpainting_examples/overture-creations-5sI6fQgYIuo_mask.png"

init_image = load_image(img_url).convert("RGB")
mask_image = load_image(mask_url).convert("RGB")

prompt = "A majestic tiger sitting on a bench"
num_inference_steps = 75
high_noise_frac = 0.7

image = pipe(
    prompt=prompt,
    image=init_image,
    mask_image=mask_image,
    num_inference_steps=num_inference_steps,
    denoising_start=high_noise_frac,
    output_type="latent",
).images
image = refiner(
    prompt=prompt,
    image=image,
    mask_image=mask_image,
    num_inference_steps=num_inference_steps,
    denoising_start=high_noise_frac,
).images[0]

일반적인 SDE 설정에서 인페인팅에 refiner를 사용하기 위해, denoising_end와 denoising_start를 제거하고 refiner의 추론 단계의 수를 적게 선택하세요.

단독 체크포인트 파일 / 원래의 파일 형식으로 불러오기

from_single_file()를 사용함으로써 원래의 파일 형식을 diffusers 형식으로 불러올 수 있습니다:

from diffusers import StableDiffusionXLPipeline, StableDiffusionXLImg2ImgPipeline
import torch

pipe = StableDiffusionXLPipeline.from_single_file(
    "./sd_xl_base_1.0.safetensors", torch_dtype=torch.float16
)
pipe.to("cuda")

refiner = StableDiffusionXLImg2ImgPipeline.from_single_file(
    "./sd_xl_refiner_1.0.safetensors", torch_dtype=torch.float16
)
refiner.to("cuda")

모델 offloading을 통해 메모리 최적화하기

out-of-memory 에러가 난다면, StableDiffusionXLPipeline.enable_model_cpu_offload()을 사용하는 것을 권장합니다.

- pipe.to("cuda")
+ pipe.enable_model_cpu_offload()

그리고

- refiner.to("cuda")
+ refiner.enable_model_cpu_offload()

torch.compile 로 추론 속도를 올리기

torch.compile를 사용함으로써 추론 속도를 올릴 수 있습니다. 이는 ca. 20% 속도 향상이 됩니다.

+ pipe.unet = torch.compile(pipe.unet, mode="reduce-overhead", fullgraph=True)
+ refiner.unet = torch.compile(refiner.unet, mode="reduce-overhead", fullgraph=True)

torch < 2.0 일 때 실행하기

참고 Stable Diffusion XL을 torch가 2.0 버전 미만에서 실행시키고 싶을 때, xformers 어텐션을 사용해주세요:

pip install xformers

+pipe.enable_xformers_memory_efficient_attention()
+refiner.enable_xformers_memory_efficient_attention()

StableDiffusionXLPipeline

class diffusers.StableDiffusionXLPipeline

< source >

( vae: AutoencoderKL text_encoder: CLIPTextModel text_encoder_2: CLIPTextModelWithProjection tokenizer: CLIPTokenizer tokenizer_2: CLIPTokenizer unet: UNet2DConditionModel scheduler: KarrasDiffusionSchedulers image_encoder: CLIPVisionModelWithProjection = None feature_extractor: CLIPImageProcessor = None force_zeros_for_empty_prompt: bool = True add_watermarker: Optional = None )

Parameters

vae (AutoencoderKL) — Variational Auto-Encoder (VAE) Model to encode and decode images to and from latent representations.
text_encoder (CLIPTextModel) — Frozen text-encoder. Stable Diffusion XL uses the text portion of CLIP, specifically the clip-vit-large-patch14 variant.
text_encoder_2 ( CLIPTextModelWithProjection) — Second frozen text-encoder. Stable Diffusion XL uses the text and pool portion of CLIP, specifically the laion/CLIP-ViT-bigG-14-laion2B-39B-b160k variant.
tokenizer (CLIPTokenizer) — Tokenizer of class CLIPTokenizer.
tokenizer_2 (CLIPTokenizer) — Second Tokenizer of class CLIPTokenizer.
unet (UNet2DConditionModel) — Conditional U-Net architecture to denoise the encoded image latents.
scheduler (SchedulerMixin) — A scheduler to be used in combination with unet to denoise the encoded image latents. Can be one of DDIMScheduler, LMSDiscreteScheduler, or PNDMScheduler.
force_zeros_for_empty_prompt (bool, optional, defaults to "True") — Whether the negative prompt embeddings shall be forced to always be set to 0. Also see the config of stabilityai/stable-diffusion-xl-base-1-0.
add_watermarker (bool, optional) — Whether to use the invisible_watermark library to watermark output images. If not defined, it will default to True if the package is installed, otherwise no watermarker will be used.

Pipeline for text-to-image generation using Stable Diffusion XL.

This model inherits from DiffusionPipeline. Check the superclass documentation for the generic methods the library implements for all the pipelines (such as downloading or saving, running on a particular device, etc.)

The pipeline also inherits the following loading methods:

load_textual_inversion() for loading textual inversion embeddings
from_single_file() for loading .ckpt files
load_lora_weights() for loading LoRA weights
save_lora_weights() for saving LoRA weights
load_ip_adapter() for loading IP Adapters

call

< source >

( prompt: Union = None prompt_2: Union = None height: Optional = None width: Optional = None num_inference_steps: int = 50 timesteps: List = None sigmas: List = None denoising_end: Optional = None guidance_scale: float = 5.0 negative_prompt: Union = None negative_prompt_2: Union = None num_images_per_prompt: Optional = 1 eta: float = 0.0 generator: Union = None latents: Optional = None prompt_embeds: Optional = None negative_prompt_embeds: Optional = None pooled_prompt_embeds: Optional = None negative_pooled_prompt_embeds: Optional = None ip_adapter_image: Union = None ip_adapter_image_embeds: Optional = None output_type: Optional = 'pil' return_dict: bool = True cross_attention_kwargs: Optional = None guidance_rescale: float = 0.0 original_size: Optional = None crops_coords_top_left: Tuple = (0, 0) target_size: Optional = None negative_original_size: Optional = None negative_crops_coords_top_left: Tuple = (0, 0) negative_target_size: Optional = None clip_skip: Optional = None callback_on_step_end: Union = None callback_on_step_end_tensor_inputs: List = ['latents'] **kwargs ) → ~pipelines.stable_diffusion_xl.StableDiffusionXLPipelineOutput or tuple

Parameters

prompt (str or List[str], optional) — The prompt or prompts to guide the image generation. If not defined, one has to pass prompt_embeds. instead.
prompt_2 (str or List[str], optional) — The prompt or prompts to be sent to the tokenizer_2 and text_encoder_2. If not defined, prompt is used in both text-encoders
height (int, optional, defaults to self.unet.config.sample_size * self.vae_scale_factor) — The height in pixels of the generated image. This is set to 1024 by default for the best results. Anything below 512 pixels won’t work well for stabilityai/stable-diffusion-xl-base-1.0 and checkpoints that are not specifically fine-tuned on low resolutions.
width (int, optional, defaults to self.unet.config.sample_size * self.vae_scale_factor) — The width in pixels of the generated image. This is set to 1024 by default for the best results. Anything below 512 pixels won’t work well for stabilityai/stable-diffusion-xl-base-1.0 and checkpoints that are not specifically fine-tuned on low resolutions.
num_inference_steps (int, optional, defaults to 50) — The number of denoising steps. More denoising steps usually lead to a higher quality image at the expense of slower inference.
timesteps (List[int], optional) — Custom timesteps to use for the denoising process with schedulers which support a timesteps argument in their set_timesteps method. If not defined, the default behavior when num_inference_steps is passed will be used. Must be in descending order.
sigmas (List[float], optional) — Custom sigmas to use for the denoising process with schedulers which support a sigmas argument in their set_timesteps method. If not defined, the default behavior when num_inference_steps is passed will be used.
denoising_end (float, optional) — When specified, determines the fraction (between 0.0 and 1.0) of the total denoising process to be completed before it is intentionally prematurely terminated. As a result, the returned sample will still retain a substantial amount of noise as determined by the discrete timesteps selected by the scheduler. The denoising_end parameter should ideally be utilized when this pipeline forms a part of a “Mixture of Denoisers” multi-pipeline setup, as elaborated in Refining the Image Output
guidance_scale (float, optional, defaults to 5.0) — Guidance scale as defined in Classifier-Free Diffusion Guidance. guidance_scale is defined as w of equation 2. of Imagen Paper. Guidance scale is enabled by setting guidance_scale > 1. Higher guidance scale encourages to generate images that are closely linked to the text prompt, usually at the expense of lower image quality.
negative_prompt (str or List[str], optional) — The prompt or prompts not to guide the image generation. If not defined, one has to pass negative_prompt_embeds instead. Ignored when not using guidance (i.e., ignored if guidance_scale is less than 1).
negative_prompt_2 (str or List[str], optional) — The prompt or prompts not to guide the image generation to be sent to tokenizer_2 and text_encoder_2. If not defined, negative_prompt is used in both text-encoders
num_images_per_prompt (int, optional, defaults to 1) — The number of images to generate per prompt.
eta (float, optional, defaults to 0.0) — Corresponds to parameter eta (η) in the DDIM paper: https://arxiv.org/abs/2010.02502. Only applies to schedulers.DDIMScheduler, will be ignored for others.
generator (torch.Generator or List[torch.Generator], optional) — One or a list of torch generator(s) to make generation deterministic.
latents (torch.Tensor, optional) — Pre-generated noisy latents, sampled from a Gaussian distribution, to be used as inputs for image generation. Can be used to tweak the same generation with different prompts. If not provided, a latents tensor will ge generated by sampling using the supplied random generator.
prompt_embeds (torch.Tensor, optional) — Pre-generated text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, text embeddings will be generated from prompt input argument.
negative_prompt_embeds (torch.Tensor, optional) — Pre-generated negative text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, negative_prompt_embeds will be generated from negative_prompt input argument.
pooled_prompt_embeds (torch.Tensor, optional) — Pre-generated pooled text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, pooled text embeddings will be generated from prompt input argument.
negative_pooled_prompt_embeds (torch.Tensor, optional) — Pre-generated negative pooled text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, pooled negative_prompt_embeds will be generated from negative_prompt input argument. ip_adapter_image — (PipelineImageInput, optional): Optional image input to work with IP Adapters.
ip_adapter_image_embeds (List[torch.Tensor], optional) — Pre-generated image embeddings for IP-Adapter. It should be a list of length same as number of IP-adapters. Each element should be a tensor of shape (batch_size, num_images, emb_dim). It should contain the negative image embedding if do_classifier_free_guidance is set to True. If not provided, embeddings are computed from the ip_adapter_image input argument.
output_type (str, optional, defaults to "pil") — The output format of the generate image. Choose between PIL: PIL.Image.Image or np.array.
return_dict (bool, optional, defaults to True) — Whether or not to return a ~pipelines.stable_diffusion_xl.StableDiffusionXLPipelineOutput instead of a plain tuple.
cross_attention_kwargs (dict, optional) — A kwargs dictionary that if specified is passed along to the AttentionProcessor as defined under self.processor in diffusers.models.attention_processor.
guidance_rescale (float, optional, defaults to 0.0) — Guidance rescale factor proposed by Common Diffusion Noise Schedules and Sample Steps are Flawed guidance_scale is defined as φ in equation 16. of Common Diffusion Noise Schedules and Sample Steps are Flawed. Guidance rescale factor should fix overexposure when using zero terminal SNR.
original_size (Tuple[int], optional, defaults to (1024, 1024)) — If original_size is not the same as target_size the image will appear to be down- or upsampled. original_size defaults to (height, width) if not specified. Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952.
crops_coords_top_left (Tuple[int], optional, defaults to (0, 0)) — crops_coords_top_left can be used to generate an image that appears to be “cropped” from the position crops_coords_top_left downwards. Favorable, well-centered images are usually achieved by setting crops_coords_top_left to (0, 0). Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952.
target_size (Tuple[int], optional, defaults to (1024, 1024)) — For most cases, target_size should be set to the desired height and width of the generated image. If not specified it will default to (height, width). Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952.
negative_original_size (Tuple[int], optional, defaults to (1024, 1024)) — To negatively condition the generation process based on a specific image resolution. Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952. For more information, refer to this issue thread: https://github.com/huggingface/diffusers/issues/4208.
negative_crops_coords_top_left (Tuple[int], optional, defaults to (0, 0)) — To negatively condition the generation process based on a specific crop coordinates. Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952. For more information, refer to this issue thread: https://github.com/huggingface/diffusers/issues/4208.
negative_target_size (Tuple[int], optional, defaults to (1024, 1024)) — To negatively condition the generation process based on a target image resolution. It should be as same as the target_size for most cases. Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952. For more information, refer to this issue thread: https://github.com/huggingface/diffusers/issues/4208.
callback_on_step_end (Callable, PipelineCallback, MultiPipelineCallbacks, optional) — A function or a subclass of PipelineCallback or MultiPipelineCallbacks that is called at the end of each denoising step during the inference. with the following arguments: callback_on_step_end(self: DiffusionPipeline, step: int, timestep: int, callback_kwargs: Dict). callback_kwargs will include a list of all tensors as specified by callback_on_step_end_tensor_inputs.
callback_on_step_end_tensor_inputs (List, optional) — The list of tensor inputs for the callback_on_step_end function. The tensors specified in the list will be passed as callback_kwargs argument. You will only be able to include variables listed in the ._callback_tensor_inputs attribute of your pipeline class.

Returns

~pipelines.stable_diffusion_xl.StableDiffusionXLPipelineOutput or tuple

~pipelines.stable_diffusion_xl.StableDiffusionXLPipelineOutput if return_dict is True, otherwise a tuple. When returning a tuple, the first element is a list with the generated images.

Function invoked when calling the pipeline for generation.

Examples:

>>> import torch
>>> from diffusers import StableDiffusionXLPipeline

>>> pipe = StableDiffusionXLPipeline.from_pretrained(
...     "stabilityai/stable-diffusion-xl-base-1.0", torch_dtype=torch.float16
... )
>>> pipe = pipe.to("cuda")

>>> prompt = "a photo of an astronaut riding a horse on mars"
>>> image = pipe(prompt).images[0]

encode_prompt

< source >

( prompt: str prompt_2: Optional = None device: Optional = None num_images_per_prompt: int = 1 do_classifier_free_guidance: bool = True negative_prompt: Optional = None negative_prompt_2: Optional = None prompt_embeds: Optional = None negative_prompt_embeds: Optional = None pooled_prompt_embeds: Optional = None negative_pooled_prompt_embeds: Optional = None lora_scale: Optional = None clip_skip: Optional = None )

Parameters

prompt (str or List[str], optional) — prompt to be encoded
prompt_2 (str or List[str], optional) — The prompt or prompts to be sent to the tokenizer_2 and text_encoder_2. If not defined, prompt is used in both text-encoders device — (torch.device): torch device
num_images_per_prompt (int) — number of images that should be generated per prompt
do_classifier_free_guidance (bool) — whether to use classifier free guidance or not
negative_prompt (str or List[str], optional) — The prompt or prompts not to guide the image generation. If not defined, one has to pass negative_prompt_embeds instead. Ignored when not using guidance (i.e., ignored if guidance_scale is less than 1).
negative_prompt_2 (str or List[str], optional) — The prompt or prompts not to guide the image generation to be sent to tokenizer_2 and text_encoder_2. If not defined, negative_prompt is used in both text-encoders
prompt_embeds (torch.Tensor, optional) — Pre-generated text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, text embeddings will be generated from prompt input argument.
negative_prompt_embeds (torch.Tensor, optional) — Pre-generated negative text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, negative_prompt_embeds will be generated from negative_prompt input argument.
pooled_prompt_embeds (torch.Tensor, optional) — Pre-generated pooled text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, pooled text embeddings will be generated from prompt input argument.
negative_pooled_prompt_embeds (torch.Tensor, optional) — Pre-generated negative pooled text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, pooled negative_prompt_embeds will be generated from negative_prompt input argument.
lora_scale (float, optional) — A lora scale that will be applied to all LoRA layers of the text encoder if LoRA layers are loaded.
clip_skip (int, optional) — Number of layers to be skipped from CLIP while computing the prompt embeddings. A value of 1 means that the output of the pre-final layer will be used for computing the prompt embeddings.

Encodes the prompt into text encoder hidden states.

get_guidance_scale_embedding

< source >

( w: Tensor embedding_dim: int = 512 dtype: dtype = torch.float32 ) → torch.Tensor

Parameters

w (torch.Tensor) — Generate embedding vectors with a specified guidance scale to subsequently enrich timestep embeddings.
embedding_dim (int, optional, defaults to 512) — Dimension of the embeddings to generate.
dtype (torch.dtype, optional, defaults to torch.float32) — Data type of the generated embeddings.

Returns

torch.Tensor

Embedding vectors with shape (len(w), embedding_dim).

See https://github.com/google-research/vdm/blob/dc27b98a554f65cdc654b800da5aa1846545d41b/model_vdm.py#L298

StableDiffusionXLImg2ImgPipeline

class diffusers.StableDiffusionXLImg2ImgPipeline

< source >

( vae: AutoencoderKL text_encoder: CLIPTextModel text_encoder_2: CLIPTextModelWithProjection tokenizer: CLIPTokenizer tokenizer_2: CLIPTokenizer unet: UNet2DConditionModel scheduler: KarrasDiffusionSchedulers image_encoder: CLIPVisionModelWithProjection = None feature_extractor: CLIPImageProcessor = None requires_aesthetics_score: bool = False force_zeros_for_empty_prompt: bool = True add_watermarker: Optional = None )

Parameters

vae (AutoencoderKL) — Variational Auto-Encoder (VAE) Model to encode and decode images to and from latent representations.
text_encoder (CLIPTextModel) — Frozen text-encoder. Stable Diffusion XL uses the text portion of CLIP, specifically the clip-vit-large-patch14 variant.
text_encoder_2 ( CLIPTextModelWithProjection) — Second frozen text-encoder. Stable Diffusion XL uses the text and pool portion of CLIP, specifically the laion/CLIP-ViT-bigG-14-laion2B-39B-b160k variant.
tokenizer (CLIPTokenizer) — Tokenizer of class CLIPTokenizer.
tokenizer_2 (CLIPTokenizer) — Second Tokenizer of class CLIPTokenizer.
unet (UNet2DConditionModel) — Conditional U-Net architecture to denoise the encoded image latents.
scheduler (SchedulerMixin) — A scheduler to be used in combination with unet to denoise the encoded image latents. Can be one of DDIMScheduler, LMSDiscreteScheduler, or PNDMScheduler.
requires_aesthetics_score (bool, optional, defaults to "False") — Whether the unet requires an aesthetic_score condition to be passed during inference. Also see the config of stabilityai/stable-diffusion-xl-refiner-1-0.
force_zeros_for_empty_prompt (bool, optional, defaults to "True") — Whether the negative prompt embeddings shall be forced to always be set to 0. Also see the config of stabilityai/stable-diffusion-xl-base-1-0.
add_watermarker (bool, optional) — Whether to use the invisible_watermark library to watermark output images. If not defined, it will default to True if the package is installed, otherwise no watermarker will be used.

Pipeline for text-to-image generation using Stable Diffusion XL.

The pipeline also inherits the following loading methods:

load_textual_inversion() for loading textual inversion embeddings
from_single_file() for loading .ckpt files
load_lora_weights() for loading LoRA weights
save_lora_weights() for saving LoRA weights
load_ip_adapter() for loading IP Adapters

call

< source >

( prompt: Union = None prompt_2: Union = None image: Union = None strength: float = 0.3 num_inference_steps: int = 50 timesteps: List = None sigmas: List = None denoising_start: Optional = None denoising_end: Optional = None guidance_scale: float = 5.0 negative_prompt: Union = None negative_prompt_2: Union = None num_images_per_prompt: Optional = 1 eta: float = 0.0 generator: Union = None latents: Optional = None prompt_embeds: Optional = None negative_prompt_embeds: Optional = None pooled_prompt_embeds: Optional = None negative_pooled_prompt_embeds: Optional = None ip_adapter_image: Union = None ip_adapter_image_embeds: Optional = None output_type: Optional = 'pil' return_dict: bool = True cross_attention_kwargs: Optional = None guidance_rescale: float = 0.0 original_size: Tuple = None crops_coords_top_left: Tuple = (0, 0) target_size: Tuple = None negative_original_size: Optional = None negative_crops_coords_top_left: Tuple = (0, 0) negative_target_size: Optional = None aesthetic_score: float = 6.0 negative_aesthetic_score: float = 2.5 clip_skip: Optional = None callback_on_step_end: Union = None callback_on_step_end_tensor_inputs: List = ['latents'] **kwargs ) → ~pipelines.stable_diffusion.StableDiffusionXLPipelineOutput or tuple

Parameters

prompt (str or List[str], optional) — The prompt or prompts to guide the image generation. If not defined, one has to pass prompt_embeds. instead.
prompt_2 (str or List[str], optional) — The prompt or prompts to be sent to the tokenizer_2 and text_encoder_2. If not defined, prompt is used in both text-encoders
image (torch.Tensor or PIL.Image.Image or np.ndarray or List[torch.Tensor] or List[PIL.Image.Image] or List[np.ndarray]) — The image(s) to modify with the pipeline.
strength (float, optional, defaults to 0.3) — Conceptually, indicates how much to transform the reference image. Must be between 0 and 1. image will be used as a starting point, adding more noise to it the larger the strength. The number of denoising steps depends on the amount of noise initially added. When strength is 1, added noise will be maximum and the denoising process will run for the full number of iterations specified in num_inference_steps. A value of 1, therefore, essentially ignores image. Note that in the case of denoising_start being declared as an integer, the value of strength will be ignored.
num_inference_steps (int, optional, defaults to 50) — The number of denoising steps. More denoising steps usually lead to a higher quality image at the expense of slower inference.
timesteps (List[int], optional) — Custom timesteps to use for the denoising process with schedulers which support a timesteps argument in their set_timesteps method. If not defined, the default behavior when num_inference_steps is passed will be used. Must be in descending order.
sigmas (List[float], optional) — Custom sigmas to use for the denoising process with schedulers which support a sigmas argument in their set_timesteps method. If not defined, the default behavior when num_inference_steps is passed will be used.
denoising_start (float, optional) — When specified, indicates the fraction (between 0.0 and 1.0) of the total denoising process to be bypassed before it is initiated. Consequently, the initial part of the denoising process is skipped and it is assumed that the passed image is a partly denoised image. Note that when this is specified, strength will be ignored. The denoising_start parameter is particularly beneficial when this pipeline is integrated into a “Mixture of Denoisers” multi-pipeline setup, as detailed in Refine Image Quality.
denoising_end (float, optional) — When specified, determines the fraction (between 0.0 and 1.0) of the total denoising process to be completed before it is intentionally prematurely terminated. As a result, the returned sample will still retain a substantial amount of noise (ca. final 20% of timesteps still needed) and should be denoised by a successor pipeline that has denoising_start set to 0.8 so that it only denoises the final 20% of the scheduler. The denoising_end parameter should ideally be utilized when this pipeline forms a part of a “Mixture of Denoisers” multi-pipeline setup, as elaborated in Refine Image Quality.
guidance_scale (float, optional, defaults to 7.5) — Guidance scale as defined in Classifier-Free Diffusion Guidance. guidance_scale is defined as w of equation 2. of Imagen Paper. Guidance scale is enabled by setting guidance_scale > 1. Higher guidance scale encourages to generate images that are closely linked to the text prompt, usually at the expense of lower image quality.
negative_prompt (str or List[str], optional) — The prompt or prompts not to guide the image generation. If not defined, one has to pass negative_prompt_embeds instead. Ignored when not using guidance (i.e., ignored if guidance_scale is less than 1).
negative_prompt_2 (str or List[str], optional) — The prompt or prompts not to guide the image generation to be sent to tokenizer_2 and text_encoder_2. If not defined, negative_prompt is used in both text-encoders
num_images_per_prompt (int, optional, defaults to 1) — The number of images to generate per prompt.
eta (float, optional, defaults to 0.0) — Corresponds to parameter eta (η) in the DDIM paper: https://arxiv.org/abs/2010.02502. Only applies to schedulers.DDIMScheduler, will be ignored for others.
generator (torch.Generator or List[torch.Generator], optional) — One or a list of torch generator(s) to make generation deterministic.
latents (torch.Tensor, optional) — Pre-generated noisy latents, sampled from a Gaussian distribution, to be used as inputs for image generation. Can be used to tweak the same generation with different prompts. If not provided, a latents tensor will ge generated by sampling using the supplied random generator.
prompt_embeds (torch.Tensor, optional) — Pre-generated text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, text embeddings will be generated from prompt input argument.
negative_prompt_embeds (torch.Tensor, optional) — Pre-generated negative text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, negative_prompt_embeds will be generated from negative_prompt input argument.
pooled_prompt_embeds (torch.Tensor, optional) — Pre-generated pooled text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, pooled text embeddings will be generated from prompt input argument.
negative_pooled_prompt_embeds (torch.Tensor, optional) — Pre-generated negative pooled text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, pooled negative_prompt_embeds will be generated from negative_prompt input argument. ip_adapter_image — (PipelineImageInput, optional): Optional image input to work with IP Adapters.
ip_adapter_image_embeds (List[torch.Tensor], optional) — Pre-generated image embeddings for IP-Adapter. It should be a list of length same as number of IP-adapters. Each element should be a tensor of shape (batch_size, num_images, emb_dim). It should contain the negative image embedding if do_classifier_free_guidance is set to True. If not provided, embeddings are computed from the ip_adapter_image input argument.
output_type (str, optional, defaults to "pil") — The output format of the generate image. Choose between PIL: PIL.Image.Image or np.array.
return_dict (bool, optional, defaults to True) — Whether or not to return a ~pipelines.stable_diffusion.StableDiffusionXLPipelineOutput instead of a plain tuple.
cross_attention_kwargs (dict, optional) — A kwargs dictionary that if specified is passed along to the AttentionProcessor as defined under self.processor in diffusers.models.attention_processor.
guidance_rescale (float, optional, defaults to 0.0) — Guidance rescale factor proposed by Common Diffusion Noise Schedules and Sample Steps are Flawed guidance_scale is defined as φ in equation 16. of Common Diffusion Noise Schedules and Sample Steps are Flawed. Guidance rescale factor should fix overexposure when using zero terminal SNR.
original_size (Tuple[int], optional, defaults to (1024, 1024)) — If original_size is not the same as target_size the image will appear to be down- or upsampled. original_size defaults to (height, width) if not specified. Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952.
crops_coords_top_left (Tuple[int], optional, defaults to (0, 0)) — crops_coords_top_left can be used to generate an image that appears to be “cropped” from the position crops_coords_top_left downwards. Favorable, well-centered images are usually achieved by setting crops_coords_top_left to (0, 0). Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952.
target_size (Tuple[int], optional, defaults to (1024, 1024)) — For most cases, target_size should be set to the desired height and width of the generated image. If not specified it will default to (height, width). Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952.
negative_original_size (Tuple[int], optional, defaults to (1024, 1024)) — To negatively condition the generation process based on a specific image resolution. Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952. For more information, refer to this issue thread: https://github.com/huggingface/diffusers/issues/4208.
negative_crops_coords_top_left (Tuple[int], optional, defaults to (0, 0)) — To negatively condition the generation process based on a specific crop coordinates. Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952. For more information, refer to this issue thread: https://github.com/huggingface/diffusers/issues/4208.
negative_target_size (Tuple[int], optional, defaults to (1024, 1024)) — To negatively condition the generation process based on a target image resolution. It should be as same as the target_size for most cases. Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952. For more information, refer to this issue thread: https://github.com/huggingface/diffusers/issues/4208.
aesthetic_score (float, optional, defaults to 6.0) — Used to simulate an aesthetic score of the generated image by influencing the positive text condition. Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952.
negative_aesthetic_score (float, optional, defaults to 2.5) — Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952. Can be used to simulate an aesthetic score of the generated image by influencing the negative text condition.
clip_skip (int, optional) — Number of layers to be skipped from CLIP while computing the prompt embeddings. A value of 1 means that the output of the pre-final layer will be used for computing the prompt embeddings.
callback_on_step_end (Callable, PipelineCallback, MultiPipelineCallbacks, optional) — A function or a subclass of PipelineCallback or MultiPipelineCallbacks that is called at the end of each denoising step during the inference. with the following arguments: callback_on_step_end(self: DiffusionPipeline, step: int, timestep: int, callback_kwargs: Dict). callback_kwargs will include a list of all tensors as specified by callback_on_step_end_tensor_inputs.
callback_on_step_end_tensor_inputs (List, optional) — The list of tensor inputs for the callback_on_step_end function. The tensors specified in the list will be passed as callback_kwargs argument. You will only be able to include variables listed in the ._callback_tensor_inputs attribute of your pipeline class.

Returns

~pipelines.stable_diffusion.StableDiffusionXLPipelineOutput or tuple

~pipelines.stable_diffusion.StableDiffusionXLPipelineOutput if return_dict is True, otherwise a `tuple. When returning a tuple, the first element is a list with the generated images.

Function invoked when calling the pipeline for generation.

Examples:

>>> import torch
>>> from diffusers import StableDiffusionXLImg2ImgPipeline
>>> from diffusers.utils import load_image

>>> pipe = StableDiffusionXLImg2ImgPipeline.from_pretrained(
...     "stabilityai/stable-diffusion-xl-refiner-1.0", torch_dtype=torch.float16
... )
>>> pipe = pipe.to("cuda")
>>> url = "https://huggingface.co/datasets/patrickvonplaten/images/resolve/main/aa_xl/000000009.png"

>>> init_image = load_image(url).convert("RGB")
>>> prompt = "a photo of an astronaut riding a horse on mars"
>>> image = pipe(prompt, image=init_image).images[0]

encode_prompt

< source >

Parameters

prompt (str or List[str], optional) — prompt to be encoded
prompt_2 (str or List[str], optional) — The prompt or prompts to be sent to the tokenizer_2 and text_encoder_2. If not defined, prompt is used in both text-encoders device — (torch.device): torch device
num_images_per_prompt (int) — number of images that should be generated per prompt
do_classifier_free_guidance (bool) — whether to use classifier free guidance or not
negative_prompt (str or List[str], optional) — The prompt or prompts not to guide the image generation. If not defined, one has to pass negative_prompt_embeds instead. Ignored when not using guidance (i.e., ignored if guidance_scale is less than 1).
negative_prompt_2 (str or List[str], optional) — The prompt or prompts not to guide the image generation to be sent to tokenizer_2 and text_encoder_2. If not defined, negative_prompt is used in both text-encoders
prompt_embeds (torch.Tensor, optional) — Pre-generated text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, text embeddings will be generated from prompt input argument.
negative_prompt_embeds (torch.Tensor, optional) — Pre-generated negative text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, negative_prompt_embeds will be generated from negative_prompt input argument.
pooled_prompt_embeds (torch.Tensor, optional) — Pre-generated pooled text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, pooled text embeddings will be generated from prompt input argument.
negative_pooled_prompt_embeds (torch.Tensor, optional) — Pre-generated negative pooled text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, pooled negative_prompt_embeds will be generated from negative_prompt input argument.
lora_scale (float, optional) — A lora scale that will be applied to all LoRA layers of the text encoder if LoRA layers are loaded.
clip_skip (int, optional) — Number of layers to be skipped from CLIP while computing the prompt embeddings. A value of 1 means that the output of the pre-final layer will be used for computing the prompt embeddings.

Encodes the prompt into text encoder hidden states.

get_guidance_scale_embedding

< source >

( w: Tensor embedding_dim: int = 512 dtype: dtype = torch.float32 ) → torch.Tensor

Parameters

w (torch.Tensor) — Generate embedding vectors with a specified guidance scale to subsequently enrich timestep embeddings.
embedding_dim (int, optional, defaults to 512) — Dimension of the embeddings to generate.
dtype (torch.dtype, optional, defaults to torch.float32) — Data type of the generated embeddings.

Returns

torch.Tensor

Embedding vectors with shape (len(w), embedding_dim).

See https://github.com/google-research/vdm/blob/dc27b98a554f65cdc654b800da5aa1846545d41b/model_vdm.py#L298

StableDiffusionXLInpaintPipeline

class diffusers.StableDiffusionXLInpaintPipeline

< source >

( vae: AutoencoderKL text_encoder: CLIPTextModel text_encoder_2: CLIPTextModelWithProjection tokenizer: CLIPTokenizer tokenizer_2: CLIPTokenizer unet: UNet2DConditionModel scheduler: KarrasDiffusionSchedulers image_encoder: CLIPVisionModelWithProjection = None feature_extractor: CLIPImageProcessor = None requires_aesthetics_score: bool = False force_zeros_for_empty_prompt: bool = True add_watermarker: Optional = None )

Parameters

vae (AutoencoderKL) — Variational Auto-Encoder (VAE) Model to encode and decode images to and from latent representations.
text_encoder (CLIPTextModel) — Frozen text-encoder. Stable Diffusion XL uses the text portion of CLIP, specifically the clip-vit-large-patch14 variant.
text_encoder_2 ( CLIPTextModelWithProjection) — Second frozen text-encoder. Stable Diffusion XL uses the text and pool portion of CLIP, specifically the laion/CLIP-ViT-bigG-14-laion2B-39B-b160k variant.
tokenizer (CLIPTokenizer) — Tokenizer of class CLIPTokenizer.
tokenizer_2 (CLIPTokenizer) — Second Tokenizer of class CLIPTokenizer.
unet (UNet2DConditionModel) — Conditional U-Net architecture to denoise the encoded image latents.
scheduler (SchedulerMixin) — A scheduler to be used in combination with unet to denoise the encoded image latents. Can be one of DDIMScheduler, LMSDiscreteScheduler, or PNDMScheduler.
requires_aesthetics_score (bool, optional, defaults to "False") — Whether the unet requires a aesthetic_score condition to be passed during inference. Also see the config of stabilityai/stable-diffusion-xl-refiner-1-0.
force_zeros_for_empty_prompt (bool, optional, defaults to "True") — Whether the negative prompt embeddings shall be forced to always be set to 0. Also see the config of stabilityai/stable-diffusion-xl-base-1-0.
add_watermarker (bool, optional) — Whether to use the invisible_watermark library to watermark output images. If not defined, it will default to True if the package is installed, otherwise no watermarker will be used.

Pipeline for text-to-image generation using Stable Diffusion XL.

The pipeline also inherits the following loading methods:

load_textual_inversion() for loading textual inversion embeddings
from_single_file() for loading .ckpt files
load_lora_weights() for loading LoRA weights
save_lora_weights() for saving LoRA weights
load_ip_adapter() for loading IP Adapters

call

< source >

( prompt: Union = None prompt_2: Union = None image: Union = None mask_image: Union = None masked_image_latents: Tensor = None height: Optional = None width: Optional = None padding_mask_crop: Optional = None strength: float = 0.9999 num_inference_steps: int = 50 timesteps: List = None sigmas: List = None denoising_start: Optional = None denoising_end: Optional = None guidance_scale: float = 7.5 negative_prompt: Union = None negative_prompt_2: Union = None num_images_per_prompt: Optional = 1 eta: float = 0.0 generator: Union = None latents: Optional = None prompt_embeds: Optional = None negative_prompt_embeds: Optional = None pooled_prompt_embeds: Optional = None negative_pooled_prompt_embeds: Optional = None ip_adapter_image: Union = None ip_adapter_image_embeds: Optional = None output_type: Optional = 'pil' return_dict: bool = True cross_attention_kwargs: Optional = None guidance_rescale: float = 0.0 original_size: Tuple = None crops_coords_top_left: Tuple = (0, 0) target_size: Tuple = None negative_original_size: Optional = None negative_crops_coords_top_left: Tuple = (0, 0) negative_target_size: Optional = None aesthetic_score: float = 6.0 negative_aesthetic_score: float = 2.5 clip_skip: Optional = None callback_on_step_end: Union = None callback_on_step_end_tensor_inputs: List = ['latents'] **kwargs ) → ~pipelines.stable_diffusion.StableDiffusionXLPipelineOutput or tuple

Parameters

prompt (str or List[str], optional) — The prompt or prompts to guide the image generation. If not defined, one has to pass prompt_embeds. instead.
prompt_2 (str or List[str], optional) — The prompt or prompts to be sent to the tokenizer_2 and text_encoder_2. If not defined, prompt is used in both text-encoders
image (PIL.Image.Image) — Image, or tensor representing an image batch which will be inpainted, i.e. parts of the image will be masked out with mask_image and repainted according to prompt.
mask_image (PIL.Image.Image) — Image, or tensor representing an image batch, to mask image. White pixels in the mask will be repainted, while black pixels will be preserved. If mask_image is a PIL image, it will be converted to a single channel (luminance) before use. If it’s a tensor, it should contain one color channel (L) instead of 3, so the expected shape would be (B, H, W, 1).
height (int, optional, defaults to self.unet.config.sample_size * self.vae_scale_factor) — The height in pixels of the generated image. This is set to 1024 by default for the best results. Anything below 512 pixels won’t work well for stabilityai/stable-diffusion-xl-base-1.0 and checkpoints that are not specifically fine-tuned on low resolutions.
width (int, optional, defaults to self.unet.config.sample_size * self.vae_scale_factor) — The width in pixels of the generated image. This is set to 1024 by default for the best results. Anything below 512 pixels won’t work well for stabilityai/stable-diffusion-xl-base-1.0 and checkpoints that are not specifically fine-tuned on low resolutions.
padding_mask_crop (int, optional, defaults to None) — The size of margin in the crop to be applied to the image and masking. If None, no crop is applied to image and mask_image. If padding_mask_crop is not None, it will first find a rectangular region with the same aspect ration of the image and contains all masked area, and then expand that area based on padding_mask_crop. The image and mask_image will then be cropped based on the expanded area before resizing to the original image size for inpainting. This is useful when the masked area is small while the image is large and contain information irrelevant for inpainting, such as background.
strength (float, optional, defaults to 0.9999) — Conceptually, indicates how much to transform the masked portion of the reference image. Must be between 0 and 1. image will be used as a starting point, adding more noise to it the larger the strength. The number of denoising steps depends on the amount of noise initially added. When strength is 1, added noise will be maximum and the denoising process will run for the full number of iterations specified in num_inference_steps. A value of 1, therefore, essentially ignores the masked portion of the reference image. Note that in the case of denoising_start being declared as an integer, the value of strength will be ignored.
num_inference_steps (int, optional, defaults to 50) — The number of denoising steps. More denoising steps usually lead to a higher quality image at the expense of slower inference.
timesteps (List[int], optional) — Custom timesteps to use for the denoising process with schedulers which support a timesteps argument in their set_timesteps method. If not defined, the default behavior when num_inference_steps is passed will be used. Must be in descending order.
sigmas (List[float], optional) — Custom sigmas to use for the denoising process with schedulers which support a sigmas argument in their set_timesteps method. If not defined, the default behavior when num_inference_steps is passed will be used.
denoising_start (float, optional) — When specified, indicates the fraction (between 0.0 and 1.0) of the total denoising process to be bypassed before it is initiated. Consequently, the initial part of the denoising process is skipped and it is assumed that the passed image is a partly denoised image. Note that when this is specified, strength will be ignored. The denoising_start parameter is particularly beneficial when this pipeline is integrated into a “Mixture of Denoisers” multi-pipeline setup, as detailed in Refining the Image Output.
denoising_end (float, optional) — When specified, determines the fraction (between 0.0 and 1.0) of the total denoising process to be completed before it is intentionally prematurely terminated. As a result, the returned sample will still retain a substantial amount of noise (ca. final 20% of timesteps still needed) and should be denoised by a successor pipeline that has denoising_start set to 0.8 so that it only denoises the final 20% of the scheduler. The denoising_end parameter should ideally be utilized when this pipeline forms a part of a “Mixture of Denoisers” multi-pipeline setup, as elaborated in Refining the Image Output.
guidance_scale (float, optional, defaults to 7.5) — Guidance scale as defined in Classifier-Free Diffusion Guidance. guidance_scale is defined as w of equation 2. of Imagen Paper. Guidance scale is enabled by setting guidance_scale > 1. Higher guidance scale encourages to generate images that are closely linked to the text prompt, usually at the expense of lower image quality.
negative_prompt (str or List[str], optional) — The prompt or prompts not to guide the image generation. If not defined, one has to pass negative_prompt_embeds instead. Ignored when not using guidance (i.e., ignored if guidance_scale is less than 1).
negative_prompt_2 (str or List[str], optional) — The prompt or prompts not to guide the image generation to be sent to tokenizer_2 and text_encoder_2. If not defined, negative_prompt is used in both text-encoders
prompt_embeds (torch.Tensor, optional) — Pre-generated text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, text embeddings will be generated from prompt input argument.
negative_prompt_embeds (torch.Tensor, optional) — Pre-generated negative text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, negative_prompt_embeds will be generated from negative_prompt input argument.
pooled_prompt_embeds (torch.Tensor, optional) — Pre-generated pooled text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, pooled text embeddings will be generated from prompt input argument.
negative_pooled_prompt_embeds (torch.Tensor, optional) — Pre-generated negative pooled text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, pooled negative_prompt_embeds will be generated from negative_prompt input argument. ip_adapter_image — (PipelineImageInput, optional): Optional image input to work with IP Adapters.
ip_adapter_image_embeds (List[torch.Tensor], optional) — Pre-generated image embeddings for IP-Adapter. It should be a list of length same as number of IP-adapters. Each element should be a tensor of shape (batch_size, num_images, emb_dim). It should contain the negative image embedding if do_classifier_free_guidance is set to True. If not provided, embeddings are computed from the ip_adapter_image input argument.
num_images_per_prompt (int, optional, defaults to 1) — The number of images to generate per prompt.
eta (float, optional, defaults to 0.0) — Corresponds to parameter eta (η) in the DDIM paper: https://arxiv.org/abs/2010.02502. Only applies to schedulers.DDIMScheduler, will be ignored for others.
generator (torch.Generator, optional) — One or a list of torch generator(s) to make generation deterministic.
latents (torch.Tensor, optional) — Pre-generated noisy latents, sampled from a Gaussian distribution, to be used as inputs for image generation. Can be used to tweak the same generation with different prompts. If not provided, a latents tensor will ge generated by sampling using the supplied random generator.
output_type (str, optional, defaults to "pil") — The output format of the generate image. Choose between PIL: PIL.Image.Image or np.array.
return_dict (bool, optional, defaults to True) — Whether or not to return a StableDiffusionPipelineOutput instead of a plain tuple.
cross_attention_kwargs (dict, optional) — A kwargs dictionary that if specified is passed along to the AttentionProcessor as defined under self.processor in diffusers.models.attention_processor.
original_size (Tuple[int], optional, defaults to (1024, 1024)) — If original_size is not the same as target_size the image will appear to be down- or upsampled. original_size defaults to (height, width) if not specified. Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952.
crops_coords_top_left (Tuple[int], optional, defaults to (0, 0)) — crops_coords_top_left can be used to generate an image that appears to be “cropped” from the position crops_coords_top_left downwards. Favorable, well-centered images are usually achieved by setting crops_coords_top_left to (0, 0). Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952.
target_size (Tuple[int], optional, defaults to (1024, 1024)) — For most cases, target_size should be set to the desired height and width of the generated image. If not specified it will default to (height, width). Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952.
negative_original_size (Tuple[int], optional, defaults to (1024, 1024)) — To negatively condition the generation process based on a specific image resolution. Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952. For more information, refer to this issue thread: https://github.com/huggingface/diffusers/issues/4208.
negative_crops_coords_top_left (Tuple[int], optional, defaults to (0, 0)) — To negatively condition the generation process based on a specific crop coordinates. Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952. For more information, refer to this issue thread: https://github.com/huggingface/diffusers/issues/4208.
negative_target_size (Tuple[int], optional, defaults to (1024, 1024)) — To negatively condition the generation process based on a target image resolution. It should be as same as the target_size for most cases. Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952. For more information, refer to this issue thread: https://github.com/huggingface/diffusers/issues/4208.
aesthetic_score (float, optional, defaults to 6.0) — Used to simulate an aesthetic score of the generated image by influencing the positive text condition. Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952.
negative_aesthetic_score (float, optional, defaults to 2.5) — Part of SDXL’s micro-conditioning as explained in section 2.2 of https://huggingface.co/papers/2307.01952. Can be used to simulate an aesthetic score of the generated image by influencing the negative text condition.
clip_skip (int, optional) — Number of layers to be skipped from CLIP while computing the prompt embeddings. A value of 1 means that the output of the pre-final layer will be used for computing the prompt embeddings.
callback_on_step_end (Callable, PipelineCallback, MultiPipelineCallbacks, optional) — A function or a subclass of PipelineCallback or MultiPipelineCallbacks that is called at the end of each denoising step during the inference. with the following arguments: callback_on_step_end(self: DiffusionPipeline, step: int, timestep: int, callback_kwargs: Dict). callback_kwargs will include a list of all tensors as specified by callback_on_step_end_tensor_inputs.
callback_on_step_end_tensor_inputs (List, optional) — The list of tensor inputs for the callback_on_step_end function. The tensors specified in the list will be passed as callback_kwargs argument. You will only be able to include variables listed in the ._callback_tensor_inputs attribute of your pipeline class.

Returns

~pipelines.stable_diffusion.StableDiffusionXLPipelineOutput or tuple

~pipelines.stable_diffusion.StableDiffusionXLPipelineOutput if return_dict is True, otherwise a tuple. tuple. When returning a tuple, the first element is a list with the generated images.

Function invoked when calling the pipeline for generation.

Examples:

>>> import torch
>>> from diffusers import StableDiffusionXLInpaintPipeline
>>> from diffusers.utils import load_image

>>> pipe = StableDiffusionXLInpaintPipeline.from_pretrained(
...     "stabilityai/stable-diffusion-xl-base-1.0",
...     torch_dtype=torch.float16,
...     variant="fp16",
...     use_safetensors=True,
... )
>>> pipe.to("cuda")

>>> img_url = "https://raw.githubusercontent.com/CompVis/latent-diffusion/main/data/inpainting_examples/overture-creations-5sI6fQgYIuo.png"
>>> mask_url = "https://raw.githubusercontent.com/CompVis/latent-diffusion/main/data/inpainting_examples/overture-creations-5sI6fQgYIuo_mask.png"

>>> init_image = load_image(img_url).convert("RGB")
>>> mask_image = load_image(mask_url).convert("RGB")

>>> prompt = "A majestic tiger sitting on a bench"
>>> image = pipe(
...     prompt=prompt, image=init_image, mask_image=mask_image, num_inference_steps=50, strength=0.80
... ).images[0]

encode_prompt

< source >

Parameters

prompt (str or List[str], optional) — prompt to be encoded
prompt_2 (str or List[str], optional) — The prompt or prompts to be sent to the tokenizer_2 and text_encoder_2. If not defined, prompt is used in both text-encoders device — (torch.device): torch device
num_images_per_prompt (int) — number of images that should be generated per prompt
do_classifier_free_guidance (bool) — whether to use classifier free guidance or not
negative_prompt (str or List[str], optional) — The prompt or prompts not to guide the image generation. If not defined, one has to pass negative_prompt_embeds instead. Ignored when not using guidance (i.e., ignored if guidance_scale is less than 1).
negative_prompt_2 (str or List[str], optional) — The prompt or prompts not to guide the image generation to be sent to tokenizer_2 and text_encoder_2. If not defined, negative_prompt is used in both text-encoders
prompt_embeds (torch.Tensor, optional) — Pre-generated text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, text embeddings will be generated from prompt input argument.
negative_prompt_embeds (torch.Tensor, optional) — Pre-generated negative text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, negative_prompt_embeds will be generated from negative_prompt input argument.
pooled_prompt_embeds (torch.Tensor, optional) — Pre-generated pooled text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, pooled text embeddings will be generated from prompt input argument.
negative_pooled_prompt_embeds (torch.Tensor, optional) — Pre-generated negative pooled text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, pooled negative_prompt_embeds will be generated from negative_prompt input argument.
lora_scale (float, optional) — A lora scale that will be applied to all LoRA layers of the text encoder if LoRA layers are loaded.
clip_skip (int, optional) — Number of layers to be skipped from CLIP while computing the prompt embeddings. A value of 1 means that the output of the pre-final layer will be used for computing the prompt embeddings.

Encodes the prompt into text encoder hidden states.

get_guidance_scale_embedding

< source >

( w: Tensor embedding_dim: int = 512 dtype: dtype = torch.float32 ) → torch.Tensor

Parameters

w (torch.Tensor) — Generate embedding vectors with a specified guidance scale to subsequently enrich timestep embeddings.
embedding_dim (int, optional, defaults to 512) — Dimension of the embeddings to generate.
dtype (torch.dtype, optional, defaults to torch.float32) — Data type of the generated embeddings.

Returns

torch.Tensor

Embedding vectors with shape (len(w), embedding_dim).

See https://github.com/google-research/vdm/blob/dc27b98a554f65cdc654b800da5aa1846545d41b/model_vdm.py#L298

각 텍스트 인코더에 다른 프롬프트를 전달하기

Stable Diffusion XL는 두 개의 텍스트 인코더에 학습되었습니다. 기본 동작은 각 프롬프트에 동일한 프롬프트를 전달하는 것입니다. 그러나 일부 사용자가 품질을 향상시킬 수 있다고 지적한 것처럼 텍스트 인코더마다 다른 프롬프트를 전달할 수 있습니다. 그렇게 하려면, prompt_2와 negative_prompt_2를 prompt와 negative_prompt에 전달해야 합니다. 그렇게 함으로써, 원래의 프롬프트들(prompt)과 부정 프롬프트들(negative_prompt)를 텍스트 인코더에 전달할 것입니다.(공식 SDXL 0.9/1.0의 OpenAI CLIP-ViT/L-14에서 볼 수 있습니다.) 그리고 prompt_2와 negative_prompt_2는 text_encoder_2에 전달됩니다.(공식 SDXL 0.9/1.0의 OpenCLIP-ViT/bigG-14에서 볼 수 있습니다.)

from diffusers import StableDiffusionXLPipeline
import torch

pipe = StableDiffusionXLPipeline.from_pretrained(
    "stabilityai/stable-diffusion-xl-base-0.9", torch_dtype=torch.float16, variant="fp16", use_safetensors=True
)
pipe.to("cuda")

# OAI CLIP-ViT/L-14에 prompt가 전달됩니다
prompt = "Astronaut in a jungle, cold color palette, muted colors, detailed, 8k"
# OpenCLIP-ViT/bigG-14에 prompt_2가 전달됩니다
prompt_2 = "monet painting"
image = pipe(prompt=prompt, prompt_2=prompt_2).images[0]

< > Update on GitHub

←Diffusion Models 평가하기

Diffusers

Stable diffusion XL

팁

이용가능한 체크포인트:

사용 예시

워터마커

Text-to-Image

Image-to-image

인페인팅

이미지 결과물을 정제하기

1.) Denoisers의 앙상블

2.) 노이즈가 완전히 제거된 기본 이미지에서 이미지 출력을 정제하기

단독 체크포인트 파일 / 원래의 파일 형식으로 불러오기

모델 offloading을 통해 메모리 최적화하기

torch.compile 로 추론 속도를 올리기

torch < 2.0 일 때 실행하기

StableDiffusionXLPipeline

class diffusers.StableDiffusionXLPipeline

__call__

encode_prompt

get_guidance_scale_embedding

StableDiffusionXLImg2ImgPipeline

class diffusers.StableDiffusionXLImg2ImgPipeline

__call__

encode_prompt

get_guidance_scale_embedding

StableDiffusionXLInpaintPipeline

class diffusers.StableDiffusionXLInpaintPipeline

__call__

encode_prompt

get_guidance_scale_embedding

각 텍스트 인코더에 다른 프롬프트를 전달하기

call

call

call