ID
int64 1
38
| Question
stringlengths 20
334
|
|---|---|
1 | Compare document 4125-DEV-14624-00_Test_Specification-PC-2019-02-A.pdf with 4125-DEV-14625-00_Test_Specification-PC-2019-03-A.pdf and put the results in a table side by side. Specifically compare the test specification table section contents. |
2 | How many pages are in this document? 4125-DEV-13707-00_PC-2017-03_Report.pdf |
3 | What is Henry's Law? |
4 | Summarize this document 4125-DEV-13707-00_PC-2017-03_Report.pdf |
5 | Give me a list of the documents dealing with testing pipe |
6 | Show me a list of documents related to the testing of wires |
7 | Show me page 2 and 3 of this document 4125-DEV-14624-00_Test_Specification-PC-2019-02-A.pdf |
8 | How was test confinement achieved in 4125-DEV-14624-00_Test_Specification-PC-2019-02-A.pdf |
9 | How many images are on page 4 of this document 4125-DEV-14624-00_Test_Specification-PC-2019-02-A.pdf |
10 | What is the document number for the experimental summary sheet for bird caging? |
11 | What is the allowable gap for the tensile armor wires in bird caging? |
12 | At what pressure will the outer sheath start to lift? |
13 | What is the poison's ratio for thermal insulation S? |
14 | What is the stress relaxation for PA11? |
15 | What duration should be used for a stress relaxation test? |
16 | What are the key material properties of the HDPE GP100BK grade that are specified in the Raw Material Specification (RMS) document, and what are the test methods and frequency of testing required for those properties? |
17 | What are the key material specifications and quality control requirements for the PVDF 90615 material used in this application? |
18 | What are the key material specifications and qualification requirements for the Thermal Insulation S and Thermal Insulation HS grades of syntactic polypropylene foam insulation? |
19 | What are the key material specifications for the Thermal Insulation 015 TPV insulation material? |
20 | What are the key thermal, mechanical, and flammability performance requirements specified for the Thermal Insulation 015 TPV insulation material, and what are the test methods and acceptance criteria used to qualify this material? |
21 | What are the key thermal, mechanical, and flammability performance requirements for the Thermal Insulation 015 TPV insulation material, and how is compliance with these requirements verified through testing? |
22 | What are the key tensile creep performance requirements and test methods for the PA11 outer sheath material? |
23 | What are the key fatigue life and cyclic bending requirements for the steel ABC tape reinforcement layer, and how is compliance with these requirements verified through testing? |
24 | What are the key design requirements and qualification criteria for the automatic pressure relief valve? |
25 | What are the key technical requirements and qualification criteria for the annulus fill valve? |
26 | What is the minimum water depth required for the nitrogen in a flooded annulus to fully dissolve into the liquid seawater phase, effectively creating a liquid mono-phase environment within the annulus? |
27 | What was the root cause analysis for the premature tensile armor wire breaks observed in the in-plane bending fatigue test of the 15 inch MOHO flexible pipe sample, and how does the phenomenon of pigtailing in short, curved test samples contribute to the understanding of the failure mechanism? |
28 | What are the key design parameters and considerations for the pressure armor layer in the 10 inch flexible pipe design 9041-PID-401, and how do the in-plane bend test program and critical plane fatigue analysis methodology described in the technical note relate to evaluating the performance and lifetime of this pressure armor layer? |
29 | What are the key flowcharts and analysis methods described in the first document related to multiaxial fatigue analysis of pressure armor layers? |
30 | Show me page 13 of document 0011-DEV-6384-06-example.pdf |
31 | In the tension crushing test procedure, how is ovality calculated? |
32 | Translate page 1 of document 0012-DEV-7723.pdf to english. |
33 | What are the key material specifications and quality control requirements for the PVDF 90615 material used in this application? |
34 | What document deals with Guide tube crushing full scale test and Outer sheath wear full scale test? |
35 | Show me the pages in document 12033-DEV-14284-00 - GTC-OSW test report.pdf covering National Instrument data acquisition system. |
36 | Translate page 1 of document 0012-DEV-7723.pdf to english. |
37 | Can you briefly summarize the content in Table 5-4 of the document 12033-DEV-14284-00 - GTC-OSW test report.pdf? |
38 | Please show me the pictures of the National Instrument data acquisition system. Can you also help me extract the text information in the pictures? |
No dataset card yet
New: Create and edit this dataset card directly on the website!
Contribute a Dataset Card- Downloads last month
- 48